Non Adjustable Stand

[ugdend]

Does any one know if the non adjustable stand will fit a tank with a rim. I have a juwel Rio 240
The rim is 13mm so 1mm too big for the adjustable stand

I intend to not have the hood covers and have an open tank

 

[Administrator]

WRGB II Pro Non-adjustable Metal Stand?
See the picture below, it has only one edge.

 

[ugdend]

So in theory it should just sit on the outer edge of the tank, see picture above of rim of juwel aquarium.

The length of the tank from outer edge to outer edge is 1280mm. Would the pro with the non adjustable stand fit ok?
Thanks

 

[Administrator]

Yes just sit on the outer edge of the tank.
But the whole length is 1280mm, not compatible.

 

[ugdend]

Ok thanks. And the adjustable stand rest won’t fit on a 13mm rim?

 

[Administrator]

12mm

 

[ugdend]

Can I use the hanging stand for the pro 120?

Chihiros LED Lights Hanging Stand Kit - Chihiros Aquatic Studio

Chihiros LED Lights Hanging Stand Kit is made from aluminium alloy and both sturdy and aesthetically pleasing. It is suitable for the installation of LED lights Chihiros RGB VIVID and WRGB series, but can also be used for many other series, such as A and B series lights. - Chihiros Aquatic Studio

www.chihirosaquaticstudio.com

 

[Administrator]

Yes the glass thickness is 5mm-19mm.
With hanging rope kit: https://www.chihirosaquaticstudio.com/products/chihiros-wrgb-ii-pro-hanging-rope-kit