Wifi hub pro

[Tom1]

So, once to the latest version of the hub pro.
When the network is switched off at night, you can remove the hub from the app and have to assign the hub again.
the smart strip is not supported.
Furthermore, the wrgb 2 per and the fan is not supported.
Furthermore, the scene mode cannot be documented.
all documented by screenshot.
If you enter too long names for the denomination, miss buttons to dose.
Please fix.

 

[Tom1]

Screenshots

 

[Administrator]

Thanks for your feedback.
We have sorted out the issues you reported and our technicians will handle them as soon as possible.

 

[Administrator]

So, once to the latest version of the hub pro.
When the network is switched off at night, you can remove the hub from the app and have to assign the hub again.
the smart strip is not supported.
Furthermore, the wrgb 2 per and the fan is not supported.
Furthermore, the scene mode cannot be documented.
all documented by screenshot.
If you enter too long names for the denomination, miss buttons to dose.
Please fix.

1. Why there is a network off? Keep power and Wi-Fi on always no problem.
2. Smart power strip is Wifi device not bluetooth device, it is controlled via Wi-Fi itself, no need to connect it to Wifi Hub Pro.
3. Wifi Hub Pro supports Manual and Auto modes of devices (WRGB II and Cooling Fan), doesn't support Customize mode.
4. About the scene mode issue you mentioned, technicians ask could you please provide video for them to review?

 

[Burney]

Hi!
The notification interface is completely out of sync. The time set in the app does not match the time on the HUB, so no notifications are received! Also, it’s frustrating that the HUB only displays the 12-hour format and there’s no option to switch to 24-hour format.
I also encountered an issue where I pressed the magnetic stirrer and the dosing pump on the HUB, but they didn’t stop. I powered off the devices, and when I turned them back on, they continued running non-stop. I eventually had to delete the devices and re-run them. This is definitely not normal! All updates are up to date.

 

[Administrator]

Hi!
The notification interface is completely out of sync. The time set in the app does not match the time on the HUB, so no notifications are received! Also, it’s frustrating that the HUB only displays the 12-hour format and there’s no option to switch to 24-hour format.
I also encountered an issue where I pressed the magnetic stirrer and the dosing pump on the HUB, but they didn’t stop. I powered off the devices, and when I turned them back on, they continued running non-stop. I eventually had to delete the devices and re-run them. This is definitely not normal! All updates are up to date.

View attachment 2103

Take a photo of the WiFi Hub Pro screen, the "About" page.

 

[Burney]

Készítsen egy fotót a WiFi Hub Pro képernyőjéről, a „Névjegy” oldalról.

 

[Administrator]

View attachment 2105

Ok thanks for your information.
We passed to technicians to check, technicians said they're reviewing.
Any update we'll let you know.

 

[Burney]

Oké, köszönöm az információt.
Átadtuk a szerelőknek, hogy ellenőrizzék, a szerelők azt mondták, hogy átvizsgálják.
Bármilyen fejleményről értesítünk.

Thanks

 

[Administrator]

Thanks

Technicians said,
The todo list time issue will be fixed in the next version, and the switch between 12-hour and 24-hour formats will be added in a future upgrade.

 

[Burney]

Technicians said,
The todo list time issue will be fixed in the next version, and the switch between 12-hour and 24-hour formats will be added in a future upgrade.

That's great news, thank you!

 

[Administrator]

That's great news, thank you!

You're welcome!
As for the Dosing system issue, still need to wait 1-2 days for technicians to review.