CO2 Controler Cihiros Pro

[Van40]

Why won't it turn off? Last night I set the hours from the picture and at noon it turned on with 50 bubbles per second even though I had calibrated it to 3 bubbles per second. Now it doesn't want to turn off at 7:30 PM. I turned off the power and it's still working??? I've never seen such a miracle.

 

[Administrator]

You can delete the settings, unplug the controller for a few minutes then plug back in to set again to test.

 

[Van40]

ou can delete the settings, unplug the controller for a few minutes then plug back in to set again to test.

The problem is the working pressure. The manual says it should be 25 PSI on the pressure gauge, but I can't figure out which scale to look at. The one from 0 - 140 or the one from 0 - 1.0

 

[Van40]

The problem is the working pressure. The manual says it should be 25 PSI on the pressure gauge, but I can't figure out which scale to look at. The one from 0 - 140 or the one from 0 - 1.0

 

[Administrator]

0-140 is Psi, 0-1 is Mpa.